Network Traffic Emulator generates IP/ICMP/TCP/UDP/HTTP traffic to stress test servers,routers and firewalls under heavy network load. It is a very simple and fast program which can simulate client activity. To generate a traffic specify Source/Destination Parameters. You should also specify the packet number. To generate ICMP packets select ICMP and specify ICMP Type and ICMP Code.
For UDP or TCP packet traffic select UDP or TCP accordingly and specify Source Port and Dest Ports . For TCP packet specify TCP flags too.
You can select Other protocols by changing the protocol name in the Protocol field. Some of the available protocols are: icmp, igmp, ggp, ip, st, tcp, cbt, egp, igp, bbn-rcc-mon, nvp-ii, pup, ipv6-route,rvd,etc.
Click on the button Start to start emulation. To stop the process click on the button Stop.
|